tracker

TQMC

TQMC has acquired wide Domain Knowledge and Experience. You can FREELY access it here and here

DISCLAIMER: This matter here is a guide only. For authentic and up-to-date information, please contact TQMC.

The DIRECTIVES and STANDARDS listed here may have been subsequently REVISED . You must refer to the CURRENT REVISION and AMENDMENTS if any.

Monday, June 21, 2010

SAMEER Kolkotta for EMC/EMI testing

SAMEER (Society for Applied Microwave Electronics Engineering and Research) is a R & D Laboratory under the Department of Information Technology, Ministry of Communications & Information Technology, Government of India.

    SAMEER Kolkata Centre has been pursuing its objective of doing advanced research and development in the areas of RF, Microwave & Millimeter Wave Technology, EMI/EMC and relating these to user requirements by undertaking R & D projects and providing consultancy services. Through the medium of these projects & services, the Centre has increased its interaction with Industries and Public Sector Units and contributed to their growth. 

MIT Website

Test & Measurement



: F e a t u r e s :

Microwave & millimeterwave measurements :
» Vector Network Analyzer
» Scalar Network Analyzer.
» Spectrum Analyzer.
» Power Meter.
» Phase Noise & Noise figure
» Signal Generator
» Antenna Measurement
   Instrumentation.

Microwave Integrated Circuit Fabrication : 

» Clean room.
» Laser pattern Generator.
» PCB Fabrication machine.
» Goldwire Bonder.
» Flip Chip Bonder.
» Die Bonder.
» Inspection Microscope.
» Profilometer.
» Weller Soldering station.

EMI/EMC Measurements :
» 3M Ferrite Tiled Shielded
   Anechoic Chamber.
» Radiated Emission test facility.
» Radiated Susceptibility test
   facility.
» Magnetic Field Immunity test
   facility.
» Conducted Emission test
   facility.
» Electro Static Discharge test
   facility.
» Electrical Fast Transient / Burst
   test Facility.
» High Energy Surge test facility.
» Harmonics Emission test facility.
» EMI/EMC Consultancy.

Source


Society for Applied Microwave 
Electronics Engineering and 
Research  
Passion for Performance
R & D Laboratory of Dept. of Information Technology, Ministry of Communications & Information Technology, Govt. of India  
Home
About Us
Areas of work
Achievements
Services
Recruitment
Tender
Training
Contact Us
Kolkata - The City of Joy 
D I V I S I O N
Circuits & Systems » 
EMI/EMC » 
Antenna » 
Mechanical » 
Design Facilities
Simulation Tools » 
Measurements » 
MIC » 
Test & Measurement Facilities
EMI/EMC Test & Measurement » 
Antenna Measurement Setup » 
EMI/EMC Test and Measurement


Features :
    E-field Shielding better than 100 dB from 30 MHz.
Applications :
    Radiated emission and susceptibility of electrical or electronics product can be measured upto 1 GHz.
Users :
    Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.


Service name :
    Measurement of Radiated emission from electrical or electronic product as per CISPR 11,22 FCC part 15 standard.
Features :
    Measurement distance can be set 3M and Rx antenna height can be varied from 1M to 4M. 360º azimuth rotation of the EUT can be given.
Applications :
    Electrical or electronics product with input current less than 20A.
Users :
    Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Facility is FCC listed. Radiated emission can be measured from 30MHz to 1 GHz.


Service name :
    Radiated susceptibility test of electrical or electronic product as per IEC 61000-4-3 standard.
Features :
    Measurement distance can be set 3M and Field upto 10 V/M can be created on the EUT. Field uniformity better than 6dB for 75% or more test points.
Applications :
    Measurement distance can be set 3M and Field upto 10 V/M can be created on the EUT. Field uniformity better than 6dB for 75% or more test points.
Users :
    Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Radiated susceptibility can be tested from 80MHz to 1 GHz and sine wave modulation at 1KHz with 80% modulation depth.


Service name :
    Magnetic field Immunity test of electrical or electronic product as per IEC 61000-4-8 standard.
Features :
    Field Immunity can be tested at 50Hz. Severity level can be upto 300 A/m for continuous and upto 1000 A/m for short duration.
Applications :
    Electronics product with CRT display with input current less than 20A.
Users :
    Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Immunity can be tested at power line frequency and field strength upto 5 Gauss.


Service name :
    Measurement of conducted emission from electrical or electronic product as per CISPR 11,22 FCC part 15 standard.
Features :
    Conducted emission measurement of 3 phase EUT is possible and input current upto 25A.
Applications :
    Electrical or electronics product.
Users :
    Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Conducted Emission can be measured from 150KHz to 30MHz and also as per FCC standard.


Service name :
    ESD test of electrical or electronic product as per IEC 61000-4-2 standard.
Features :
    The severity level for air discharge is upto ±15 KV and contact discharge is upto ±8 KV. Pulse rise time is between 0.7nS to 1nS.
Applications :
    Electronic equipment sensitive to static discharge.
Users :
    Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    ESD test of EUT can be carried out upto ±15 KV.


Service name :
    EFT/Burst test of electrical or electronic product as per IEC 61000-4-4 standard.
Features :
    Pulse Rise time is 5 nS, Pulse width is 50 nS, Burst duration is 15 mS, Burst Period is 300 mS and Test voltage upto ± 4 KV
Applications :
    Electrical or electronic equipment with input current less than 16A.
Users :
    Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    EFT/Burst of EUT can be carried out upto ±4 KV and upto 5 KHz repetition rate.


Service name :
    High energy surge immunity test of electrical or electronic product as per IEC 61000-4-5 standard.
Features :
    Pulse Rise time is 1.2 mS, Pulse width is 50 mS and Test voltage upto ± 4 KV.
Applications :
    Electrical or electronic equipment with input current less than 16A.
Users :
    Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Surge generator can deliver 1.2/50mS voltage surge across high load resistance and 8/20mS current surge into a short circuit.


Service name :
    Measurement of Harmonic current emission from electrical or electronic product as per IEC 61000-3-2 standard.
Features :
    5KVA programmable source and automated measurement.
Applications :
    Electrical or electronic equipment with input current less than 16A.
Users :
    Industries in and around Kolkata and Eastern India.
Location of facility :
    SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail :
    Harmonic current emission from EUT can be carried out upto 16A input current.
MIT Website
Test & Measurement
: F e a t u r e s :
Microwave & millimeterwave measurements :
» Vector Network Analyzer
» Scalar Network Analyzer.
» Spectrum Analyzer.
» Power Meter.
» Phase Noise & Noise figure
» Signal Generator
» Antenna Measurement
   Instrumentation.

Microwave Integrated Circuit Fabrication : 

» Clean room.
» Laser pattern Generator.
» PCB Fabrication machine.
» Goldwire Bonder.
» Flip Chip Bonder.
» Die Bonder.
» Inspection Microscope.
» Profilometer.
» Weller Soldering station.

EMI/EMC Measurements :
» 3M Ferrite Tiled Shielded
   Anechoic Chamber.
» Radiated Emission test facility.
» Radiated Susceptibility test
   facility.
» Magnetic Field Immunity test
   facility.
» Conducted Emission test
   facility.
» Electro Static Discharge test
   facility.
» Electrical Fast Transient / Burst
   test Facility.
» High Energy Surge test facility.
» Harmonics Emission test facility.
» EMI/EMC Consultancy.

[NABL Accreditation under process] 


CAD Tools :
» Circuit Simulators.
» HFSS 10.1
» CST microwave studio 2006.
» ADS 2007
» Ansoft Designer 3.5
» IE3D

Mechanical CAD :
» Auto CAD.
» Inventer.
» ProE.

MIC Facility :

Precision Mechanical Fabrication Facilities :
» Lathe.
» Conventional Vertical Milling.
» CNC wire cut EDM.
» CNC Vertical Machining Centre.
» Hydraulic Surface Grinding.
» Precesion Portable Lathe.
» Double Lapping machine.

2006-2007 SAMEER, Kolkata. All rights reserved.Powered By SAMEER Kolkata Centre
.


Source

No comments:

Post a Comment