tracker

TQMC

TQMC has acquired wide Domain Knowledge and Experience. You can FREELY access it here and here

DISCLAIMER: This matter here is a guide only. For authentic and up-to-date information, please contact TQMC.

The DIRECTIVES and STANDARDS listed here may have been subsequently REVISED . You must refer to the CURRENT REVISION and AMENDMENTS if any.

Monday, April 13, 2009

ce marking by TuV


 Product certification
 
Home  |  Contact us  |  Sitemap
 
 
CE marking | GS marking | Bauart approval TUV mark ATEX

Overview
A TÜV seal points out that a neutral, competent body has evaluated your product has been evaluated by with respect to safety, quality, or a certain product characteristic. Our product certifications are intended to facilitate the strategic positioning of your products on the European markets. TÜV India with its vast experience and international network can help you achieve your goals.

TÜV India, in partnership with its parent company TÜV NORD, conducts inspection and assessment for the following product markings:

CE marking
GS marking
Bauart approval
TUV mark
ATEX

CE marking 
TÜV India partners with TÜV NORD to certify the CE mark of the European Union. Standing for the French Conformité Européenne, the CE mark has become the passport for product groups wishing to enter the European market. 

As a notified body to the European Union, TÜV India will assist your company to achieve compliance testing in a 
domain regulated by EC directives (Low-voltage directive, toys directive, machinery directive, etc.). Within the framework of the CE mark we are therefore able to offer all the requisite services on a one-stop basis. The necessary areas of the CE conformity assessment include the following:
type approval testing
compatibility tests (electromagnetic, biological compatibility etc.)
safety tests in our own testing laboratories
examination of product design
preparation of expert appraisal reports
certification of quality systems
We assist companies as early as the development stage of new products by answering all questions related to the application of regulations, occupational safety and health provisions connected with the safety of equipment.

GS marking 
GS stands for Geprüfte Sicherheit, i.e. the approved product meets German safety regulations. The GS mark is a voluntary quality mark, giving your product a valuable advantage in competition. 

The GS mark documents the evaluation of a product by a national test center and includes an initial inspection of the production equipment as well as regular supervision 
of the production. If the requirements for the awarding of the GS mark are met, the GS mark may be attached on consumer goods and investment goods next to the CE mark or CE label. 

Bauart approval
The Bauart Mark stands for conformity of component groups, parts and elements. It strengthens the consumer confidence in the products and thus boosts sales. It also acts as a valuable marketing tool. 



TÜV mark
The TÜV Mark is a registered certification mark of TÜV Nord. TÜV is an independent product-safety testing and certification organisation. The TÜV Mark may only be used on or in connection with the products certified by TÜV and under the terms of written agreement with TÜV.

An electrical, mechanical or electro-mechanical product bearing the TÜV mark signifies that it was tested and meets the minimum requirements of prescribed product safety standards. The mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance.

The TÜV Mark is important because an independent, technically expert organisation that doesn't have a financial interest in the product's ultimate profitability, determines whether foreseeable risks associated with the product's use have been eliminated or minimised. Once in the marketplace, a product must continue to meet safety requirements in order to bear the TUV Mark or the mark will be removed.

ATEX 
The ATEX mark aims at testing and certifying explosion-proof equipment. TÜV India can issue the following certificates, in co-operation with TUV NORD Germany: 

EG prototype test according to appendix III of the EU guideline 94/9/EG
Quality assurance production according to appendix IV of the EU guideline 94/9/EG
Quality assurance product according to appendix VII of the EU guideline 94/9/EG

Contact us
Mr. M.S.Ogale 
Head, Homologation
Tel: 020-2567 5514
Emailogale@tuv-nord.com 

 
Related links
Management system certification
Industrial services
Training services
Our reach
 
 Copyright © 2006 TUV India
All rights reserved

Designed and maintained by 
The Information Company Pvt Ltd
Home | Contact us | Site map | About Us | Our reach | Management system certification 

Industrial services | Product certification | Training services | Careers | Our clients

No comments:

Post a Comment