tracker

TQMC

TQMC has acquired wide Domain Knowledge and Experience. You can FREELY access it here and here

DISCLAIMER: This matter here is a guide only. For authentic and up-to-date information, please contact TQMC.

The DIRECTIVES and STANDARDS listed here may have been subsequently REVISED . You must refer to the CURRENT REVISION and AMENDMENTS if any.

Sunday, July 4, 2010

ISO/TS 16949:2009 Changes

Whittington Page 1 of 8 July 2009
Introduction
The third edition of the automotive quality standard, ISO/TS 16949:2009, has been published to include the text of ISO 9001:2008. ISO/TS 16949:2009 replaces ISO/TS 16949:2002 and can be ordered at this AIAG web page.
ISO/TS 16949:2009 can be ordered in hard copy or electronic format at an AIAG member price of $30 or a non-member price of $90. You are allowed to print two copies of the e-standard PDF file before storing it on your hard drive.
ISO/TS 16949:2009 was developed by the International Automotive Task Force (IATF). Along with the embedded ISO 9001:2008 text, it defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products. ISO/TS 16949:2009 is applicable to sites where customer-specified parts, for production and/or service, are manufactured.
Transition
The IATF provided the following transition information to Certification Bodies:
1. No New Requirements ISO/TS 16949:2009 introduces no new or changed requirements. The incorporated ISO 9001:2008 standard is based on clarifications or amendments to ISO 9001:2000 and those intended to improve consistency with ISO 14001:2004. 2. Application Certification Bodies and Organizations are expected to understand and apply the amendments in ISO/TS 16949:2009. Application of the clarifications related to ISO 9001:2008 requirements is effective no later than 120 days after the release of ISO/TS 16949:2009. 3. Certification Status to ISO/TS 16949:2002 The certification status to ISO/TS 16949:2002 remains in effect for the certification life. Certification to ISO/TS 2009 will be recognized with the effective date of the release of ISO/TS 16949:2009. Certification to ISO/TS 16949:2009 is not an upgrade and its term is the same as the current ISO/TS 16949:2002 certificate. 4. Certificates Issued to ISO/TS 16949:2009 IATF recognized certificates to ISO/TS 16949:2009 may be issued upon request by an organization (client) after official publication and after a regularly scheduled surveillance audit, but are not required until the next recertification audit.
ISO/TS 16949:2009 Changes
Whittington Page 2 of 8 July 2009
Key Differences
ISO/TS 16949 incorporates text from the ISO 9001 standard within boxed sections. The text unique to ISO/TS 16949 is included outside the boxed ISO 9001 sections.
Most of the differences in ISO/TS 16949:2009 compared to ISO/TS 16949:2002 are due to including the ISO 9001:2008 standard to replace the old ISO 9001:2000 text. You can see these ISO 9001:2008 changes at this Whittington & Associates web page.
The changes in the unique ISO/TS 16949:2009 text are described below. Deleted ISO/TS 16949:2002 text is indicated with strikethroughs. The new ISO/TS 16949:2009 text is underlined and highlighted in yellow.
Most of the differences in ISO/TS 16949:2009, beyond those in the boxed ISO 9001:2008 text, were to:
1. Change from “product quality” to “conformity to product requirements” in multiple places for consistency with the same change made in ISO 9001:2008.
2. Change from “regulatory” requirements to “statutory and regulatory” requirements in multiple places for consistency with the same change made in ISO 9001:2008.
3. Modify the titles for clauses 6.2.2 and 7.6 to match the changed titles in ISO 9001:2008.
4. Replace “ISO 9001:2000” with “ISO 9001:2008” and “ISO 9000:2000” with “ISO 9000:2005”.
5. Add new references in the Bibliography section and remove the withdrawn standards.
ISO/TS 16949:2009 Changes
Title Page 2nd 3rd Edition, 2002-03-01 2009-06-15 Quality management systems - Particular requirements for the application of ISO 9001:20002008 for automotive production and relevant service part organization.
Page ii The content inside the boxed text of this document is ISO 9001:20002008 text and protected by the above copyright statement.
ISO/TS 16949:2009 Changes
Whittington Page 3 of 8 July 2009
The text outside the boxes has been originated by the International Automotive Task Force. Copyright for this text is held by ANFIA, CCFA/FIEV, SMMT, VDA (see below) and the car manufacturers Daimler/Chrysler, Ford Motor Company, General Motors Corp, PSA Peugeot Citroen, Renault.
ISO/TS 16949:2009 Changes
Whittington Page 4 of 8 July 2009
Contents
(The changed entries in the table of contents are shown below)
0.3.1 IATF Guidance to ISO 16949:2002 2 Normative References 6.2.2 Competence, training, and awareness and training 6.4.1 Personal safety to achieve conformity to product quality requirements 7.4.1.1 Statutory and Rregulatory conformity 7.4.3.1 Incoming product quality conformity to requirements 7.6 Control of monitoring and measuring devices equipment Note: In this table of contents, the ISO 9001:20002008 headings are normal type face, IATF headings are in italics
Foreword International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 32.
An ISO/PAS or ISO/TS is reviewed after three years with a view to deciding whether it should be confirmed for a further three years, revised to become an International Standard, or withdrawn. In case of a confirmed ISO/PAS or ISO/TS, it is reviewed again after six years at which time it has to be either transposed into an International Standard or withdrawn. ISO/TS 16949:20022009 was prepared by the International Automotive Task Force (IATF) and Japan Automotive Manufacturers Association, Inc. (JAMA), with support from ISO/TS 176, Quality management and quality assurance. This secondthird edition of ISO/TS 16949 cancels and replaces the firstsecond edition (ISO/TS 16949:19992002), which has been technically revisedamended according to ISO 9001:2008. Boxed text is original ISO 9001:20002008 text.
Remarks for certification
(A few changes were made to the list of local oversight bodies) Associazione Nazionale FraFiliera Industrie Automobilistiche (ANFIA)
ISO/TS 16949:2009 Changes
Whittington Page 5 of 8 July 2009
Fedration des Industries des Equipements pour Vehicules (FIEV) Comite des Constructeurs Francais d’Automobiles (CCFA) IATF-France All public information about IATF can be found at www.iatfglobaloversight.org
0.3 Relationship with ISO 9004 NOTE The knowledge and use of the eight quality management principles referred to in ISO 9000:20002005 and ISO 9004:2000 should be demonstrated and cascaded through the organization by top management.
0.3.1 IATF Guidance to ISO/TS 16949:2002
“IATF Guidance to ISO/TS 16949:2002” is a document containing recommended automotive industry practices, examples, illustrations and explanations, and provides assistance in the application to conform to the requirements of this Technical Specification.
This IATF Guidance document is not intended for certification or for contractual purposes.
0.5 Goal of this Technical Specification
This Technical Specification, coupled with applicable customer-specific requirements, defines the fundamental quality management system requirements for those subscribing to this documentTechnical Specification.
1.1 General This Technical Specification, in conjunction with ISO 9001:20002008, defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products. 2 Normative references The following normativereferenced documents are indispensable for the application of this document. contains provisions, which, through reference in this text constitute provisions of this Technical Specification. For dated references, only the edition cited applies subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Technical Specification are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normativereferenced document (including any amendments) referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 9000:20002005, Quality management systems - Fundamentals and vocabulary
ISO/TS 16949:2009 Changes
Whittington Page 6 of 8 July 2009
3.1 Terms and definitions for the automotive industry For the purpose of this Technical Specificationdocument, the terms and definitions given in ISO 9000:20002005 and the following apply
3.1.1 control plan documented description of the systems and processes required for controlling product (see annex A) NOTE See Annex A.
3.1.5 laboratory scope controlled document containing - specific test, evaluations and calibrations that a laboratory is qualified to perform - a list of the equipment which it uses to perform the above, and - a list of methods and standards to which it performs the above
4.2.4 Control of records
NOTE 1 “Disposition” above includes disposal.
4.2.4.1 Records retention The control of records shall satisfy statutory, regulatory and customer requirements.
5.5.1.1 Responsibility for quality Personnel responsible for conformity to product quality requirements shall have the authority to stop production to correct quality problems.
Production operations across all shifts shall be staffed with personnel in charge of, or delegated responsibility for ensuring conformity to product quality requirements.
6.2.2.2 Training
The organization shall establish and maintain documented procedures for identifying training needs and achieving competence of all personnel performing activities affecting conformity to product quality requirements.
6.2.2.3 Training on the job The organization shall provide on-the-job training for personnel in any new or modified job affecting conformity to product quality requirements, including contract or agency personnel.
ISO/TS 16949:2009 Changes
Whittington Page 7 of 8 July 2009
6.4.1 Personnel safety to achieve conformity to product quality requirements
(only the title changed)
7.3.2.1 Product design input
The organization shall identify, document and review the product design input requirements, including the following: - targets for product qualityrequirements, life, reliability, durability, maintainability, timing and cost. 7.4.1.1 Statutory and Rregulatory conformity All purchased products or materials used in product shall conform to applicable statutory and regulatory requirements.
7.4.1.2 Supplier quality management system development Conformity with ISO 9001:20002008 is the first step in achieving this goal.
Unless otherwise specified by the customer, suppliers to the organization shall be third party registered to ISO 9001:20002008 by an accredited third-party certification body. 7.4.3.1 Incoming product quality conformity to requirements
The organization shall have a process to assure the quality of purchased product (see 7.4.3) utilizing one or more of the following methods:
- second- or third-party assessments or audits of supplier sites, when coupled with records of acceptable delivered product quality conformity to requirements
7.4.3.2 Supplier monitoring
Supplier performance shall be monitored through the following indicators: - delivered product quality conformity to requirements
7.5.1.2 Work instructions
The organization shall prepare documented work instructions for all employees having responsibilities for the operation of processes that impact conformity to product quality requirements.
ISO/TS 16949:2009 Changes
Whittington Page 8 of 8 July 2009
7.5.1.7 Feedback of information from service
NOTE The intent of the addition of “service concerns” to this subclause is to ensure that the organization is aware of nonconformities that occur external to outside of its organization. 7.6 Control of monitoring and measuring devices equipment
(only the title changed)
8.5.1.1 Continual improvement of the organization
The organization shall define a process for continual improvement (see examples in annex B of ISO 9004:2000).
Annex A
(The Control Plan annex was not changed, but the new formatting caused the annex to expand to two pages)
Bibliography
(The Bibliography for ISO/TS 16949:2009 was revised to reflect new standards, new editions of standards, additional referenced standards, and withdrawn standards since the publication of ISO/TS 16949:2002) [1] ISO 9001:2008, Quality management systems - Requirements [1] ISO 9004:2000, Quality management systems - Guidelines for performance improvements [2} ISO 9004: ----, Managing for the sustained success of an organization - A quality management approach [3] ISO 10001:2007, Customer satisfaction - Guidelines for codes of conduct for organizations [4] ISO 10002:2004, Customer satisfaction - Guidelines for complaints handling in organizations [5] ISO 10003:2007, Customer satisfaction - Guidelines for dispute resolution external to organizations [6] ISO 10005:2005, Quality management systems - Guidelines for quality plans [7] ISO 10006:2003, Quality management systems - Guidelines for quality management in projects [8] ISO 10007:2003, Quality management systems - Guidelines for configuration management [2] ISO 10011-1: 1990 (replaced by ISO 19011:2002) [3] ISO 10011-2: 1991 (replaced by ISO 19011:2002) [4] ISO 10011-3:1991 (replaced by ISO 19011:2002) [9] ISO 10012:2003, Requirements for measurement processes and measuring equipment [5] ISO 10012-1:1992 (replaced by ISO 10012:2003) [6] ISO 10012-2:1997 (replaced by ISO 10012:2003) [10] ISO/TR 10013:2001, Guidelines for quality management system documentation [11] ISO 10014:2006, Quality management - Guidelines for realizing financial and economic benefits [12] ISO 10015:1999, Quality management - Guidelines for training [13] ISO/TR 10017:2003, Guidance on statistical techniques for ISO 9001:2000 [14] ISO 10019:2005, Guidelines for the selection of quality management system consultants and use of their services
ISO/TS 16949:2009 Changes
Whittington Page 9 of 8 July 2009
[15] ISO 14001:2004, Environmental management systems - Requirements with guidance for use [7] ISO 17025:1999, General requirements for the competence of testing and calibration laboratories [16] ISO 19011:2002, Guidelines for quality and/or environmental management systems auditing [17] IEC 60300-1:2003, Dependability management - Part 1: Dependability management systems [18] IEC 61160:2006, Design review [19] ISO 90003:2004, Software engineering - Guidelines for the application of ISO 9001:2000 to computer software [8]IATF Guidance to ISO/TS 16949:2002 [20] Quality management principles, ISO, 2001 (available at www.iso.org) [21] ISO 9000 - Selection and use, ISO, 2008 (available at www.iso.org) [22] ISO 9001 for Small Business - What to do, Advice from ISI/TC 176, ISO, 2002 [23] ISO Management Systems (bimonthly publication) [24] Reference websites: http:/www.iso.org http:/www.tc176.org http:/www.iso.org/tc176/sc2 http:/www.iso.org/tc176/ISO9001AuditingPracticesGroup
Note: This paper on the changes in ISO/TS 16949:2009 has been reproduced by permission of the author, Larry Whittington. You can contact him at .


Source

15 comments:

  1. Hey there! Quick question that's totally off topic. Do you know how to make your site mobile friendly? My blog looks weird when browsing from my iphone. I'm trying to
    find a template or plugin that might be able to correct this
    problem. If you have any recommendations, please share.
    Thanks!

    Feel free to surf to my web blog glutenfreie Ernährungsform
    Here is my web blog ; laktose und fruktoseintoleranz

    ReplyDelete
  2. I have been browsing online more than 4 hours today, yet I
    never found any interesting article like yours.
    It's pretty worth enough for me. In my view, if all webmasters and bloggers made good content as you did, the internet will be much more useful than ever before.

    Look into my web site Low Carb Ernährung Erfahrungen

    ReplyDelete
  3. Excellent, what a blog it is! This blog gives helpful
    data to us, keep it up.

    Take a look at my web site - low carb cereals

    ReplyDelete
  4. Appreciating the persistence you put into your site and in
    depth information you offer. It's good to come across a blog every once in a while that isn't the same old rehashed material.

    Excellent read! I've bookmarked your site and I'm adding
    your RSS feeds to my Google account.

    Feel free to surf to my web site - wordpress 3 essential training
    my web site: sprachkurs spanisch stuttgart

    ReplyDelete
  5. Very quickly this web site will be famous among all blogging people,
    due to it's good content

    Here is my blog - bank investment

    ReplyDelete
  6. What i don't realize is if truth be told how you're not actually
    much more smartly-favored than you may be right now.

    You are very intelligent. You realize therefore considerably in the case of this subject, produced me personally believe it from
    so many varied angles. Its like women and men don't seem to be involved unless it is one thing to do with Girl gaga! Your individual stuffs excellent. Always deal with it up!

    my page: glutenfreie Ernährung

    ReplyDelete
  7. It is the best time to make some plans for
    the future and it is time to be happy. I have read this post and if I could I want to suggest you some interesting things or suggestions.
    Maybe you can write next articles referring to this article.
    I want to read even more things about it!

    my web-site :: steuberater in wiesbaden

    ReplyDelete
  8. Hi there! Quick question that's completely off topic. Do you know how to make your site mobile friendly? My blog looks weird when browsing from my iphone4. I'm trying to find a template or plugin that might be able to resolve this issue.
    If you have any recommendations, please share. Thank you!


    Stop by my web-site - lebensmittel ohne eiweiß

    ReplyDelete
  9. Hi therе everyonе, it's my first go to see at this web page, and post is truly fruitful for me, keep up posting these posts.

    my site ... référencement de site web

    ReplyDelete
  10. Please let me know if you're looking for a article writer for your weblog. You have some really good posts and I believe I would be a good asset. If you ever want to take some of the load off, I'd
    love to write some content for your blog in exchange for a link back to
    mine. Please shoot me an email if interested. Cheers!

    Feel free to visit my weblog ... Warface Brasil

    ReplyDelete
  11. It's appropriate time to make a few plans for the long run and it is time to be happy. I have learn this publish and if I could I want to counsel you some fascinating things or tips. Maybe you can write next articles referring to this article. I desire to learn even more things about it!

    Also visit my page - taif university

    ReplyDelete
  12. Wow, marvelous blog layout! How long have you been blogging for?
    you made blogging look easy. The overall look of your web site
    is magnificent, as well as the content!

    Feel free to surf to my web page; free porn

    ReplyDelete
  13. Thanks for sharing your thoughts about cameraman nunta preturi.
    Regards

    Here is my site :: preturi filmari nunti hd

    ReplyDelete
  14. Fantastic goods from you, man. I have take into accout your stuff previous to and you're just too fantastic. I really like what you've acquired here, really like what you are
    stating and the way in which in which you assert it. You're making it enjoyable and you continue to take care of to stay it smart. I can't wait to read much more from
    you. This is really a terrific web site.

    Visit my web page ... free ebook

    ReplyDelete
  15. nice blog!! i was interested to know about Who-Gmp Certification India . it was cleared now

    ReplyDelete